Conversion Kit 5x Base Side Kit (Old and New Fanatec Wheels)

5.00 out of 5
(1 customer review)

£119.94

Convert your Fanatec wheels to USB

  • *Colour

    Reset options
    Sim Racing Bay QR
    • Sim Racing Bay Male Fanatec Style QR

      16 in stock

      SKU: SRBQR
SKU: 5xB_Red Category:

Description

Conversion kit to attach to your Wheelbase.

  • Anodized aluminum case.
  • Brand new PCB version 5.x with USB data protection and filtering.
  • Coiled USB cable with choke for better interference protection.
  • Full control of firmware, so I can develop this without relying on a third party
Build from the highest quality materials that are beautifully finished.
I have designed every part of the conversion kit personally.  Everything is custom made either by me or for me.
Every kit is assembled by my hand in the UK

The Kit includes…

  • Version 5.x SRM PCB
  • Aluminum casing
  • Fitted coiled USB cable
  • JST PA Cable with Female QR pin Plug
  • 6 x M5 45mm CAP bolts with black coating
  • 6 x M5 washers
  • 6 x M5 nyloc nuts
  • Aluminum QR pin mount
  • Steel QR plug washer
  • 5 x M4 bolts

Fitting the conversion…

Fitting the conversion is easy.  All the parts you need are included.  You will need your own tools.
You MUST HAVE a Sim Racing Bay male QR otherwise you cannot use the kit
First attach the Female pin plug to the SRB QR using the supplied Aluminum back plate and supplied M4 bolts.
Next, attach the Pin plug cable to the kit PCB.
The kit must be bolted to the Wheelbase using a 70mm hole pattern.  It does not matter if your wheelbase shaft hub is threaded on not, you can use the supplied bolts and nuts to attach it.
Attach the SRB QR in front of the kit and bolt both to your wheelbase.
The Coiled USB cable must go direct to your PC – The kit is not compatible with consoles..  You will need to use a USB extension cable, our DIN cable option or have a USB hub near the wheelbase.
No soldering, cutting or gluing needed, just removing a few bolts / screws.
The conversion is fully reversable if you keep the parts that you remove.
What wheelbase can I use?
The converted wheel can be used with any wheelbase / Direct Drive system.  Because the kit plugs directly into your PC it is independent of the wheelbase.

DISCLAIMER – YOU MUST AGREE TO THESE TERMS IF YOU PURCHASE THIS KIT

Fanatec has asked us to say that they are unable to warranty their wheels that have been used on this kit or with a high torque OSW because they cannot guarantee that either will not damage their wheels.  If you purchase and use this kit from us you cannot make any warranty claim for damage to your Fanatec wheels… you use it at your own risk.  Purchasing the kit confirms that you accept this.  Please do not try and abuse their trust by attempting to make a claim.

Additional information

Weight 800.0000 g
Dimensions 11 × 11 × 9 cm
Colour

,

Compatible Wheels

Works with the following Fanatec wheels…

  • BMW GT2 V2
  • CSL Universal Hub
  • Formula V2
  • Formula V2.5
  • Formula V2.5x
  • F1 2018 LE
  • F1 2019 LE
  • F1 2020 LE
  • F1 2021 LE
  • F1 ESPORTS V2
  • F1 PS4 Blue Wheel
  • GT7 Play Station Wheel
  • McLaren GT3 V2
  • RS Wheel
  • Universal Hub V2 Xbox
  • Universal Hub V2
  • WRC
  • BMW GT2 V1
  • Formula Black
  • Formula Carbon
  • F1 Esports V1
  • McLaren GT3 V1 (No display yet)
  • Universal Hub V1
  • Universal Hub V1 Xbox
  • Porsche 918
  • BMW M4 GT3
  • CSL P1
  • CSL P1 Elite
  • CSL BMW
  • CSL P1 V2
  • Podium Hub

Does NOT work with the following Fanatec wheels…

  • Podium Endurance Button Box

Instructions

5x Base Side Kit

LINK
5x Base Side Fitting Instructions (Sorry old version – I will update soon)
Using your converted wheel

Downloads

SRM 5x and 6x PCB Kits LINK DESCRIPTION
SRM Conversion Kit Software For the latest live and Beta firmware
SRM Conversion Kit Software If above does not work download this and run setup
Latest Fanatec Drivers If using SRM Firmware 5.21 or greater
Fanalab Software If using SRM Firmware 5.21 or greater
6x, 6.2x Drawing  
5x, 5.2x Drawing  
Leo Bodnar PCB Kits LINK DESCRIPTION
Leo Bodnar Latest Last version for Leo Boards
Leo Bodnar 2.43 2.52 and 2.53 For Formula V2 and McLaren GT3 V2 conversions
Leo Bodnar 2.43 and 2.50 For Formula V2
Leo Bodnar 2.43 and 2.52 For Formula V2 and WRC
Leo Bodnar HID Flash Tool Tool for flashing Leo Board if issues with other files
SRM Teensy Based PCB Kits LINK DESCRIPTION
SRM Kits with Teensy hardware
Conversion kit flashing tool This is included in the Firmware zip files

Not sure which conversion kit version you have? Check it here…

CONVERSION KIT TOOLS LINK DESCRIPTION
Fanaleds Used to control LED’s and the display on our kits
SLIMax Manager Pro Alternative to Fanaleds
Game integration help Some games try and control the conversion directly, this page will help you turn that off
DIVIEW Simple tool for testing buttons in windows
Joystick Test Good tool to test buttons in windows, works with more buttons than DIView so will show all buttons for McLaren wheel.  You may need DX9 installing
DX9 If Joystick test crashes you probably need to install this to fix.

1 review for Conversion Kit 5x Base Side Kit (Old and New Fanatec Wheels)

  1. 5 out of 5

    Richard Erb (verified owner)

    I’m using this on my SC2 Pro with a BMW M4 GT3 wheel and a ClubSport Steering Wheel RS. I couldn’t be happier with it. I definitely recommend it to anyone.

Only logged in customers who have purchased this product may leave a review.

Shopping cart0
There are no products in the cart!
Continue shopping