QR Adapter V2 for Fanatec QR1 and QR2

This adapter allows you to attach a Fanatec QR1 or QR2 to one side and then attach the other side to a wheel.  Commonly used with the tiny emulator.

This is the second version of this product.  This version allows for both threaded and non-threaded attachment.  Making it more adaptable.

Version 6.2 has a slightly bigger outer diameter which allows the nut option to be fully surrounded and the SRM logo on the top.  The 6.2 version also includes markings for the bolt holes.  This will replace the round version.

We have added the following hole patterns.

Please see the chart at the bottom of this page for the hole descriptions.

Included in the box are:

• 6 x M5 12mm long Cap Head bolts
• 6 x M5 12mm long Countersunk bolts
  
• M5 nuts

You can use the adapter to either bolt onto a Fanatec wheel so that you can connect a QR of your choice. Or you can use it to connect a wheel to the Fanatec QR.

There are lots of combinations.  We use this on our V6 Emulator product.

Please remember that if you try and attach a non-Fanatec wheel to a Fanatec wheel base using this adapter you WILL NOT get any force feedback. The correct solutions for this are either the Fanatec Hubs or my Emulator products.

Version differences:

	Standard	Round
4 x threaded bolt holes for Fanatec QR1 or QR2 Quick Release
6 x threaded bolt holes for Fanatec QR1 or QR2 Quick Release
4 x 70mm PDC holes (Can be threaded or non-threaded)
6 x 70mm PDC holes (Can be threaded or non-threaded)
3 x Threaded 52mm PCD holes for older Fanatec wheels
3 x 50.8mm PDC holes (Can be threaded or non-threaded)
3 x 2.5mm holes to attach SRM pillar for Fanatec QR pin plug
3 x 2.5mm holes to attach SRM pillar for Fanatec QR pin plug
Side mounting for M4 bolts to mount SRM shifter adapter to mount Fanatec gear shifters.