SRM Emulator V7 Pro Upgrade

Upgrade your Emulator V7 standard to the Pro

Replace the QR mounting plate with this part.  Then your emulator will be the Pro version.

Pro version allows adding...

• Gear shifters
• Fanatec APM shifter and clutch
• Fanatec button pods
• Custom Buttons
• Hat switch with encoder
• 5v power
• Fanatec BME or Rally button box

Kit includes:

1. Button Board PCB V1.2 for Emulator V7
2. Button Board PCB Case for Emulator V7
3. Button Board PCB Case Shifter Mount Add on  for Emulator V7
4. Button Board PCB Case Cover Plate for Emulator V7
5. 3 x M3 6mm button head bolts (To attach the PCB to the case)
6. 3 x M2 counter sunk bolts (To attach cover plate)
7. 4 x M4 bolts to attach shifter mounts
8. Emulator V7 Button Board Cable 100mm

Simple Instructions:

To upgrade your V7 standard emulator to the Pro version follow these steps...

1. Remove the 3 M2.5 bolts holding the pin plug from the back of the V7 Std case.
2. Fit the pin plug to the new addon case using the same bolts. The 3 bolt holes are different on the addon case with using the bottom rather than top hole.
3. Attach the red PCB cable to the PCB inside the pin plug and the addon PCB
4. Attach the addon PCB using the 3 x M3 bolts.
5. Fit shifter adapters and cover plate if needed.