![IMG_5807](http://simracingmachines.com/cdn/shop/files/IMG_5807.png?v=1713360931&width=1445)
![Xero-Play QR storage mount](http://simracingmachines.com/cdn/shop/files/0000391_xero-play-qr-storage-mount_3307ecdb-d3e0-4d56-b230-97345d20baf9.jpg?v=1713360933&width=1445)
![20230621_194130091_iOS](http://simracingmachines.com/cdn/shop/files/c1529b3e74e25a25ba625223f8af5d7f_94c37742-974e-4cb3-adef-26394fa06b1e.png?v=1713360961&width=1445)
![IMG_5809](http://simracingmachines.com/cdn/shop/files/IMG_5809.png?v=1713360963&width=1445)
![IMG_5808](http://simracingmachines.com/cdn/shop/files/IMG_5808.png?v=1713360964&width=1445)
A 3D printed part to help store your wheels with the HRS Xero-Play QR
This product is designed to allow you to store your wheels that have the HRS / Sim-Lab Xero-Play QR safely.
Limited edition with Red wall plate and black main body.
After several prototypes it seems that there is no set angle to mount the HRS / Sim-Lab Xero-Play QR onto your wheel and everyone seem to have it slightly differently. This product comes in 2 parts which bolt together and allow you to change the angle to suit your QR mounting. It comes with 4 x M5 bolts, washers and nuts lightly attached so you can adjust before tightening.
Mounting the product to a wall or 80/20 is via 2 5.5mm diameter mounting holes. Mounting bolts are not included as we assume everyone will mount differently. Our own wheels are bolted to the 80/20 monitor stand behind the screen.
The mount holds the wheel at a 2 degree angle just to help keep it in place.
This product is designed to allow you to store your wheels that have the HRS / Sim-Lab Xero-Play QR safely.
Limited edition with Red wall plate and black main body.
This product is for the Xero-Play V3
After several prototypes it seems that there is no set angle to mount the HRS / Sim-Lab Xero-Play QR onto your wheel and everyone seem to have it slightly differently. This product comes in 2 parts which bolt together and allow you to change the angle to suit your QR mounting. It comes with 4 x M5 bolts, washers and nuts lightly attached so you can adjust before tightening.
Mounting the product to a wall or 80/20 is via 2 5.5mm diameter mounting holes. Mounting bolts are not included as we assume everyone will mount differently. Our own wheels are bolted to the 80/20 monitor stand behind the screen.
The mount holds the wheel at a 2 degree angle just to help keep it in place.